Printek FieldPro RT43 Series Operator's Manual page 58

Appendix F – Mobile Setup Utility
To navigate Mobile Setup, use the cursor arrows and the enter key, or the directional pad on a Windows Mobile
device. Use Up/Down to highlight one of the choices. On the "Use ..." lines, you may use Left/Right or +/- to
change the value. Note that when changing the value on the "Use Interface:" line, the menu options below it
change accordingly. On all other choices, use Enter, the center of the directional pad, or the Select Button to
select that item. The function of each of the choices on this menu are as described below.
Use Interface:
Cable Menu >
Bluetooth Menu >
Wi-Fi Menu >
Use Emulation:
Image Management >
Device Settings >
Advanced >
Printer Utilities >
Save Changes?
52
Selects the printer interface that will be selected after changes are saved to the
printer.
Changing this value will change the interface menu presented and allow
changes to be made to any interface in the printer.
Available when "Use Interface: Cable" is displayed.
Advances to the Serial Interface Menu and presents the items described in
"Appendix B – Using the Serial/USB Interface".
Only available when printer has a Bluetooth interface and "Use Interface:
Bluetooth" is displayed.
Advances to the Bluetooth Interface Menu and presents the items described in
"Appendix C – Using the Bluetooth
Only available when printer has a Wi-Fi interface and "Use Interface: Wi-Fi"
is displayed.
Advances to the Wi-Fi Interface Menu and presents the items described in
"Appendix D – Using the Wi-Fi Interface".
Selects the printer emulation language that will be used when changes are
saved to the printer.
Advances to the Image Management Menu and presents the items described in
the "Image Management" section of "Appendix A – Printer Configuration".
Advances to the Device Settings Menu and presents the items described in the
"Device Settings" section of "Appendix A – Printer Configuration".
Advances to the Advanced Menu and presents the items described in the
"Advanced" section of "Appendix A – Printer Configuration".
Advances to selections where the current setup values may be stored in, or
retrieved from, a file. Additional printer maintenance functions are also
provided.
Advances to selections where any changes may be saved to the printer or
discarded, and then disconnect from the printer.
Note: Make sure the "Use ..." selections in the Main Menu are correct
before saving changes to the printer. These will be "selected" when
changes are saved to the printer. Saved changes will take effect
immediately after Mobile Setup disconnects from the printer and the
printer completes an internal reset.
®
Interface".