Mobile Setup Utility Examples; Example: Changing The Default Font And Print Contrast - Printek FieldPro RT43 Series Operator's Manual

Appendix F – Mobile Setup Utility

Mobile Setup Utility Examples

Example: Changing the Default Font and Print Contrast

This example shows the steps required to change the font selection from 16.9 cpi Courier to 18.5 cpi Courier,
and then continue on to change the print contrast from 0 to +10.
Note that either of these values may be overridden by your software application. When this occurs, selecting a
different value in Setup will not change the output printed by your application. This may also apply to some
other items within the Format Menu.
After connecting to the printer as described previously, move to and select the "Format Menu" line.
To change the default font size from 16.9 cpi Courier to 18.5 cpi Courier, move to the "Sys Font" line and
increment the value twice.
53