Printek FieldPro RT43 Series Operator's Manual page 49

Appendix D – Using the Wi-Fi Interface
WLAN Auth
Possible Values: Auto*, Open, Shared
This item specifies the authentication method that will be used when establishing connections on the network.
The method may be to use an open key or a shared key. If set to "Auto", the printer will automatically match
itself to the method used by other nodes.
IP Address Assign
Possible Values: DHCP*, Static
This item specifies whether the printer will obtain an IP address from a DHCP server, or if a an IP address will
be manually assigned.
IP Address
Possible Values: 0.0.0.0*, User specified
This item specifies the IP address for the printer.
Note that this item has no effect if IP Address Method is not set to "Static".
IP Subnet Mask
Possible Values: 0.0.0.0*, User specified
This item specifies the range of addresses, or the size of the network, that the printer's IP address belongs to.
Note that this item has no effect if IP Address Method is not set to "Static".
IP Gateway
Possible Values: 0.0.0.0*, User specified
This item specifies the network node where data destined for a node outside of the LAN should be directed.
Note that this item has no effect if IP Address Method is not set to "Static".
Tunnel Port Number
Possible Values: 00000 ... 08023* ... 65384
This item specifies the TCP/IP port to be used for data that are to be printed..
43