Turning The Printer On And Off - Printek FieldPro RT43 Series Operator's Manual

Symbol
Power Button
Paper Feed Button
Power Indicator
Battery Indicator
Error Indicator
= Off
Refer to Figure 5 and locate the printer's Power Button. To turn the printer on, simply press and release the
Power Button. To turn the printer off, press and hold the Power Button. The printer will "beep" and then
power down after the button is released.
Function Status
Press to turn printer on.
Press and hold to turn printer off.
Advances paper a preset distance or to the next black
mark. Also used to clear paper error conditions.
or
With Alarm
With Alarm
= On
Figure 6 - Control Panel Buttons & Indicators

Turning the Printer On and Off

Printer is Off.
Printer is On.
Printer is in Standby. (Will wake on
receipt of data.)
Printer is receiving data and/or printing, or
is in the Control Panel Setup mode.
Battery is fully charged.
Battery needs to be charged.
Battery is being charged.
No error.
Paper out. (Load paper and press Paper
Feed to clear.)
Paper out or Paper Door is open.
Communications error. (Power off to
clear.)
= Slow Blink = Rapid Flash
Printer Operation
5