Chapter 2 - Installation And Quick Setup; Selecting An Appropriate Installation Location - Printek FormsPro 4300 Operation Manual

INSTALLATION AND QUICK SETUP
SELECTING AN APPROPRIATE INSTALLATION
LOCATION
The FormsPro 4000 series printers are designed to be installed on a Printek print stand, or on
an open-top print stand that allows paper to be fed through the paper supply slot on the
bottom of the printer. Since the printer also draws air through this slot for cooling, make sure
that no part of the print stand obstructs this slot. After cooling the electronics, the motors,
and the print head, the air is exhausted through the paper exit slot on top of the printer.
The installation location also requires power for the printer, support for cabling requirements
to your computer, and space for the paper supply(s) and printed paper collection.
After you unpack the printer as described in the unpacking instructions (make sure all
packing materials are removed as described) and place the printer at the desired location,
connect the power cord to the rear of the unit and plug the other end into a proper wall outlet.
3
1
2
Page 2-1