Removing Printed Output; Using The Magnetic Card Reader - Printek FieldPro RT43 Series Operator's Manual

Printer Operation

Removing Printed Output

If all the printing is not yet out of the printer and the host has finished sending data to the printer, the paper may
be advanced for tearing by simply pressing the Paper Feed Button.
To tear the paper, pull the paper against the tear bar (a sharp edge on the paper door) at a slight angle as shown
in Figure 7, and then continue to pull the paper in the direction shown to tear it off.
Figure 7 - Tearing Off Printer Output

Using the Magnetic Card Reader

The optional Magnetic Card Reader (MCR) may be used by some applications to read information from credit
cards, drivers licenses, etc.
When the host system sends a request to the printer to enable the Magnetic Card Reader, the MCR Indicator
will light to indicate that the card may now be passed through the MCR slot, or "swiped". Refer to Figure 8 for
the card orientation.
7