Replacing The Optional Internal Usb Memory Key - Dell PowerEdge R230 Owner's Manual

Hide thumbs Also See for PowerEdge R230:
Table of Contents

Advertisement

Replacing the optional internal USB memory key

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Follow the procedure listed in
3.
Remove the expansion card riser.
Steps
1.
Locate the USB connector or USB key on the system board.
To locate the USB connector, see
2.
If installed, remove the USB key from the USB connector.
3.
Insert the replacement USB key into the USB connector.
Figure 33. Replacing the internal USB key
1.
USB memory key
Next steps
1.
Install the expansion card riser.
2.
Follow the procedure listed in
3.
While booting, press F2 to enter System Setup and verify that the system detects the USB key.
Related Tasks
Removing the expansion card riser
Safety
instructions.
Before working inside your
System board jumpers and
After working inside your
system.
connectors.
2.
USB memory key connector
system.
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents