Installing The Cooling Fan Blank - Dell PowerEdge R230 Owner's Manual

Figure 31. Removing and installing a cooling fan blank
1. cooling fan blank (2)
3. cooling fan bracket
Next steps
1. Install the cooling fan.
2. Follow the procedure listed in

Installing the cooling fan blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The procedure for removing each cooling fan blank is identical.
1. Ensure that you follow the
2. Follow the procedure listed in
Steps
1. Lower the cooling fan blank into the cooling fan bracket.
2. Insert the tabs on the cooling fan blanks into the slots on the cooling fan bracket.
3. Press the cooling fan blank until it clicks into place.
Next steps
Follow the procedure listed in
78
After working inside your
Safety instructions.
Before working inside your
After working inside your
2. release tab (2)
4. tab
system.
system.
system.