Storage Controller Specifications; Drive Specifications; Connectors Specifications - Dell PowerEdge R230 Owner's Manual

Power supply unit Specification
1039 BTU/hr maximum (250 W PSU)
Voltage
100–240 V AC, autoranging, 50/60 Hz

Storage controller specifications

Storage controller Specification
Storage controller PERC H730, PERC H330, PERC H830, PERC S130.
type

Drive specifications

Drives Specification
Four hard drive Up to four 3.5-inch cabled hard drives, or
systems
Up to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch
adapters, or
Up to four 3.5-inch hot swappable SATA, or Nearline SAS hard drives
Two hard drive Up to two 3.5-inch cabled hard drives
systems
Optical drive One optional slim SATA DVD-ROM or DVD+/-RW drive

Connectors specifications

Back connectors Specification
NIC Two 10/100/1000 Mbps
Serial 9-pin, DTE, 16550-compatible
USB Two 9-pin, USB 3.0-compliant
Video 15-pin VGA
iDRAC8 One optional 1 GbE Ethernet
SD vFlash One optional SD vFlash memory card
136
NOTE: This system is also designed to be connected to IT power systems with
a phase-to-phase voltage not exceeding 230 V.
NOTE: Your system supports software RAID S130 and a PERC card. For more
information on software RAID, see the Dell PowerEdge RAID Controller (PERC)
documentation at Dell.com/storagecontrollermanuals.
NOTE: The card slot is available for use only if the iDRAC8 Enterprise license is
installed on your system.