4.
Keep the Phillips #2 screwdriver ready.
Steps
1.
Remove the screws from the side of the cabled hard drive carrier.
2.
Remove the hard drive from the hard drive carrier.
Figure 21. Removing a cabled hard drive from a cabled hard drive carrier
1.
cabled hard drive
3.
screw (4)
Next steps
1.
Install the cabled hard drive in the hard drive carrier.
2.
Install the hard drive carrier into the slot.
3.
Follow the procedure listed in
Related Tasks
Installing a cabled hard drive into a hard drive carrier
Installing a cabled hard drive into a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Follow the procedure listed in
62
After working inside your
Safety
instructions.
Before working inside your
2.
cabled hard drive carrier
system.
system.