Installing The Led Control Panel Assembly - Dell PowerEdge R230 Owner's Manual

3. slot on the chassis
Figure 51. Removing and installing the LED control panel board—four cabled hard drive chassis
1. screw (2)
3. control panel board
5. standoff on the chassis (2)
Next steps
1. Install the LED control panel assembly.
2. Follow the procedure listed in
Related Tasks

Installing the LED control panel assembly

Installing the LED control panel assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
Steps
1. For cabled hard drive systems, perform the following steps:
108
After working inside your
Safety instructions.
Before working inside your
2. control panel connector cable
4. USB connector cable
system.
system.