Recommended Tools; Front Bezel (Optional); Installing The Optional Front Bezel - Dell PowerEdge R230 Owner's Manual

3. If applicable, install the system into the rack. For more information, see the Rack Installation
placemat at Dell.com/poweredgemanuals.
4. Reconnect the peripherals and connect the system to the electrical outlet.
5. Turn on the system, including any attached peripherals.
Related Tasks

Installing the optional front bezel

Installing the system cover

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Key to the system keylock
• Phillips #2 screwdriver
• Wrist strap
• Plastic scribe

Front bezel (optional)

Installing the optional front bezel
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2. Hook the right end of the bezel onto the chassis.
3. Fit the free end of the bezel onto the system.
4. Lock the bezel.
44