Re-Enabling The Tpm For Bitlocker Users; Re-Enabling The Tpm For Txt Users - Dell PowerEdge R230 Owner's Manual

5. slot on the system board
Next steps
1. Install the system board.
2. Follow the procedure listed in
Related Tasks
Installing the system board

Re-enabling the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see http://technet.microsoft.com/en-us/library/
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Re-enabling the TPM for TXT users

1. While booting your system, press F2 to enter System Setup.
2. In the System Setup Main Menu, click System BIOS → System Security Settings.
3. In the TPM Security option, select On with Pre-boot Measurements.
4. In the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. In the System Setup Main Menu, click System BIOS → System Security Settings.
9. In the Intel TXT option, select On.
After working inside your system.
115