26
INSTALLATION
4. Installing the meters
I n s t a l l t h e m e t e r s s e c u r e l y i n
t h e d a s h b o a r d w h e r e t h e y
c a n b e e a s i l y r e a d a n d a r e n o t
e xp o se d t o w a t er s p l a sh e s . Th e
recommended dashboard thickness is
2~11mm(0.08~0.4 in.). For dashboards
thicker than 11mm(0.4 in.), the fitting
3
plate should be cut accordingly. Be
sure to tighten the fitting nuts on the
fitting plate evenly.
Dash
board
The dashboard inclination should be
50°~70°
Fitting plate
Dash
board
Fitting plate
50° - 70°
All models of the 40D2 and 50D2
series have six electric poles. Set the
tachometer selector knob to "6P".
Selector
12P
6P
4P
Cut holes with 85mm (3.346 in.)
diameter for the tachometer and
52.5mm (2.067 in.) for the trim meter.
Tachometer
ø85
Trim meter
ø52.5