Stopping The Engine - TOHATSU M 40D2 Owner's Manual

Hide thumbs Also See for M 40D2:
Table of Contents

Advertisement

5. Stopping the engine

�������
!
● Do not shift into Reverse during
planning, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
● Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering
system and/or shifting mechanism
may be damaged.
�������
!
Never stop the engine immediately
after a full throttle run. Keep it running
for two or three minutes at idling
speed (Shift Lever set to Neutral) to
allow it to cool down.
ENGINE OPERATION
■ F type
1 Reduce the engine speed to idling
rpm.
2 Keep pressing on the Stop Switch
or pull out the lock plate/ The engine
will then stop.
■ EF, EFO, EFTO type
1 Reduce the engine speed to idling
rpm.
2 Turn the Main Switch to "OFF",
keep pressing on the Stop Switch
or pull out the lock plate. The engine
will then stop.
Stop switch lock plate
51
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 50d2Mw 50d2

Table of Contents