62
TRAILERING
!
When trailering the outboard motor
should be in a vertical (normal running)
position, fully down. Trailering in the
tilted position may cause damage to
the outboard motor, boat, etc.
If trailering with outboard motor fully
down is not available (the gear case
skeg is too close to the road in a
vertical position), fix the outboard
motor securely using a device (like
a transom saver bar) in the tilted
position.
8
!
The tilt support device supplied on
your outboard motor is not intended
for trailering. It is intended to support
the outboard motor while the boat is
docked, beached, etc.
�������
�������