Connecting Cords And Cables; S Installing The Meters - TOHATSU 50 Owner's Manual

4 Connecting Cords and Cable
@ Connect cable harness B to cable harness A.
OC onnect pink and light blue leads from cable harness A and B to each other.
Lead wires
/I
Cable Harness B
Cable Harness A
AAA
DANGER I
Do not disconnect the electric couplers while the engine is running. as
this will damage the C.D. unit and could result in a serious electric
I
5 Installing the meters
Install the meterz securely in the dashboard where they can be easily read and
are not exposed to water splashes. The recommended dashboard thickness is
2-l Imm (0.08 - 0.4 in.). For dashboards thicker than llmm (0.4 in.). the
fitting plate should be cut accordingly. Be sure to tlghten the fitting nutz on
the fitting plate evenly.
Fining plate
The dashboard inclination should be 50' - 70'
25