Storing The Outboard Motor - TOHATSU M 40D2 Owner's Manual

Hide thumbs Also See for M 40D2:
Table of Contents

Advertisement

3. Storing the outboard motor

Keep the motor in a vertical position
when you store it.
Note
If you store the motor in a horizontal
position, lay the motor as shown in
figure above.
REMOVING AND CARRYING THE MOTOR
■ EF, EFO, EPO type
�������
!
When taking the motor from package
or removing the motor from the boat,
never release the lock lever. If the lock
lever is released, it will be very easy
the clamp bracket to spring up to the
tilting direction because it is not fixed.
*Tie the clamp bracket to the
outboard with a rope.
*Pay attention to the tilting direction
so as not to be injured by the
springing clamp bracket.
LOCK
Reverse
Lock lever
Rope
�������
!
Do not go under outboard motor tilted
up even if it is supported by support
bar, or accidental fall of outboard
motor could lead to severe personal
injury.
�������
!
Close air vent screw of fuel tank and
fuel cock before carrying or storing
outboard motor and fuel tank, or fuel
may leak, potentially catching fire.
61
Clamp bracket
Tilting
direction
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 50d2Mw 50d2

Table of Contents