TOHATSU M 40D2 Owner's Manual page 52

52
ENGINE OPERATION
■ EPO, EPTO type
1 Move the Remote Control lever to
Neutral (N) and let the engine idle
for 2-3 minutes to allow it to cool
down.
5
2 Turn the main switch key counter-
clockwise or pull out the stop
switch. The engine will stop.
The engine can also be stopped by
pressing on the stop switch.
Stop switch
lock plate
Neutral (N)
ON
OFF
Notes
● After stopping the engine, close the
air vent screw on the tank cap.
● Disconnect the fuel connector of
the engine or the fuel tank.
● Disconnect the cables from the
battery if the engine will not be used
for an extended period of time.
3 Disconnect the fuel connector from
the engine.
�������
!
Never fill up portable fuel tanks on
board to avoid fire or explosion resulting
from spilled gasoline. If gasoline is ever
spilled on board, wipe it up thoroughly.
Fuel tanks must always be filled up on
land.
4 Close the air vent screw on the fuel
tank cap.
Air vent screw