Alarm Action - EverFocus PARAGON 264x1 User Manual

The Apply to Days button:
This button can be used to copy schedules to other days. Select which
days you wish to copy to. "Select All" selects all days, "Clear All"
deselects all days. Click "OK" to copy the settings or "Cancel" to exit
without copying.
The Apply to Cameras button:
This button can be used to copy schedules to other cameras. Select
which cameras you wish to copy to. "Select All" selects all cameras,
"Clear All" deselects all cameras. Click "OK" to copy the settings or
"Cancel" to exit without copying.

5.5.4 Alarm Action

This setup menu page defines the recording responses
per camera to any "alarm" input trigger signals –
according to time periods on specific days of the week
and/or holidays and/or 'other' days. The user can use
this page to select when an alarm input trigger will
trigger recording, and when it won't.
Alarm: Select the number of the camera channel that the
to-be-configured alarm is associated with. This alarm
would usually be associated with the camera that is
closest to it, and would usually have the same number as
that camera's channel. Remember that all recordings
for this alarm will be recorded with the camera that
has the same number. Each alarm can be set on a 24-
hour time block for Holiday (Hol), Other (Oth), Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed), Thursday
(Thu), Friday (Fri), or Saturday (Sat).
Timelines: The timelines use two different colors to distinguish each recording mode.
Off (Gray): No recording during this time period.
On (Beige): Alarm trigger events will be recorded during this time period.
To set the Alarm Action schedule with the Mouse:
1. Click on the "Alarm Action" option in the left column, then click on the right hand side of the screen. The border for
that region will now turn blue.
2. Click on the number of the alarm input ("Alarm" – usually associated with the camera channel of the same number)
you wish to configure. That number will be framed in blue.
3. Click on a desired start time block on a time bar. There are 24 blocks on the time bar representing 24 hours
respectively. At this time, the selected time bar will be highlighted by a red frame and the selected block will be
48