Camera Setting; Basic Setting - EverFocus PARAGON 264x1 User Manual

Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the network. If
DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so that the DVR will be able to communicate outside the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 1: This field shows the primary DNS server for your network. When DHCP is selected and an internet
connection is available, this value will be assigned automatically. This field must be assigned correctly if you plan to
use the DDNS feature (see section 5.6.3 DDNS for more details).
DNS Server 2: This field shows the secondary DNS server for your network.
Note: The default addresses in the machine are for internal testing only. You must supply your own
addresses to comply with your network. Refer to section 5.6.3 for more
details.
Apply: Press the "Apply" button to save and apply the above Express settings. The
system will automatically adjust the recording frame rate according to your settings. A
confirmation window will pop up. Press "Yes" to change the Resolution, Recording
Frame Rate and Quality (of all the cameras) according to your Express settings.

5.2 CAMERA SETTING

On the right is a screenshot of the CAMERA SETTING MENU. This
menu is used to configure individual camera settings.

5.2.1 Basic Setting

Camera: Select the camera to be configured.
Title: The title setting allows you to assign a title to the selected
camera. Each title supports up to 16 characters. The on-screen
keyboard will appear when you click the title option.
Install: Check this box to enable the selected camera. To take full
advantage of the DVR's recording abilities, any unused cameras should have this option set to "disabled". If you enable this
setting for a camera, the DVR will immediately start to record that camera's feed. You can end such a recording action by
exiting the configuration menu, clicking on the camera channel's box, and then pressing the Stop button on the front panel.
Covert: Check this box to hide the camera picture in the Multi-channel, Full-screen and Sequence viewing modes for all
users that log in with usernames that are classified as "Operators" in the User setup menu (see the System Setting > User
section for more details). However, the footage will still be recorded and can be played back by any user who has
playback rights.
Record Mode: Two recording modes are available.
Normal + Event: This recording mode includes Normal (continuous recording until recording is switched off by the user)
and Event recording.
Event Only: Footage will be recorded only when specified events occur.
Resolution: Select the recording resolution based on the camera's video format.
NTSC: 704x480 / 704x240 / 352x240
30