Table of Contents
Advertisement
highlighted in blue frame. Initially, the selected block and all following blocks will be gray, which means this gray
period has been set to the recording mode corresponding to gray (alarm action recording OFF).
4. Change the section to different mode (with a different color) by clicking on the first block of the section. The color
switches from gray > beige > gray, every time user clicks the first block of a section. Beige indicates 'alarm action
recording ON'.
3. To set the end of a period, select the time block following the end of the period defined in the step above. The first
click will highlight the block in blue. A second click will toggle the state/color of that block and the remainder of the
time bar, ending the above defined period
Setting the Alarm Action schedule with the Front Panel:
Enter the Alarm Action setting mode: highlight the "Alarm Action:
1.
menu choice and press the "Enter" button to enter Alarm Action setting
mode. At this time, the whole editing area at the right side will be
highlighted within a blue frame. See the image on the right.
Enter alarm selection mode: Use the scrolling wheel to switch to the
2.
Alarm selection mode.
Selecting alarm: Use the scrolling wheel to select an alarm to configure. Selected alarm number will be highlighted
3.
by a blue frame.
Enter time bar editing mode: Use the scrolling wheel to switch to time bar editing mode. When this mode is
4.
selected, the area surrounding the time bars will be highlighted within a blue frame.
Select desired time bar for setting: Press the Enter button, the first
5.
time bar will be selected and highlighted in a red frame. See the image
on the right. Use the scrolling wheel to choose the desired time bar for
setting.
Editing blocks in a time bar: When a time bar is chosen (highlighted
6.
in red frame), the press Enter button to select that time bar for
configuration; then the first block of this bar will be selected
(highlighted in blue frame). Use the scrolling wheel to move to the
desired block for the starting time, and press the Enter button again to
confirm. At this time, the current and all following blocks will turn into gray, which means this gray period has been
set to the recording mode of gray (Alarm Action off). User can also change the period to a different record mode by
following instructions in the next step.
Changing recording mode (color) of a period: Use the scrolling wheel to select the first block of a period. Press
7.
the Enter button, and this period will switch to another color, which means switching to another recording mode. The
color switch sequence is gray->beige->gray.
Apply to Days: This button can be used to copy schedules to other days. Select
which days you wish to copy to. "Select All" selects all days, "Clear All" deselects all
days. Click "OK" to copy the settings or "Cancel" to exit without copying.
Apply to Cameras: This button can be used to copy schedules to other cameras.
Select which cameras you wish to copy to. "Select All" selects all cameras, "Clear All"
deselects all cameras. Click "OK" to copy the settings or "Cancel" to exit without
copying.
49
Advertisement
Table of Contents
