EverFocus PARAGON 264x1 User Manual page 53

To set a camera channel's recording schedule using the Front Panel:
In Brief: Use the example above (mouse configuration) to understand the logic of setting the recording modes per
camera and per period for the Recording Schedule. Then, apply the logic of the Front-Panel navigation rules (p14-15) to
scroll between submenus and setting values. Click Menu/Esc to exit from a setting field to a previous setting field. Click
Enter to confirm selections and enter into setting fields. Use the inner disk and outer rim of the scrolling wheel to scroll
between options and highlight options.
In Detail: Follow the following steps:
1. Enter schedule setting mode: Select the "Schedule' icon on the
configuration menu and press the 'Enter' button; the left hand column will
be highlighted in a blue frame. Use the scrolling wheel to highlight the
'Schedule' option and press the "Enter" button to enter the schedule
configuration page. At this point, the whole editing area at the lower right
side will be highlighted by a blue frame.
2. Enter camera selection mode: Use the scrolling wheel to switch to
Camera selection mode. When Camera selection mode is selected, the
list of camera numbers will be highlighted in a blue frame. See the image on the right.
3. Selecting camera: Use the scrolling wheel to select desired camera to configure. Selected camera number will be
highlighted by a blue frame. See the image above.
4. Enter time bar editing mode: Use the scrolling wheel to switch to timeline editing mode. When this mode is selected,
all 9 time bars will be highlighted within a blue frame.
5. Select desired timeline for setting: press the "Enter" button; the first
timeline will be selected for setting and highlighted in a red frame. See the
image on the right. Use the scrolling wheel to select the desired timeline
for setting.
6. Editing blocks in a time bar: when a time bar is selected (highlighted in
red frame), press the "Enter" button, and the first block of this bar will be
selected (highlighted in blue frame). Use the scrolling wheel to select the
desired block as the starting time, and press Enter button to confirm. At
this time, the current and all following blocks will turn into gray, which
means this gray period has been set to the recording mode of gray (No Rec). The user can also change the period to a
different record mode (with a different color) by following the instructions in the next step.
7. Changing recording mode (color) of a period: Use
Right/Left arrow key to switch to the first block (with
number on it) of a period. Clicking Enter button, and this
period will switch to another color, which means
switching to another record mode. The color switch
sequence is gray>beige>blue.
8. To exit the screen, press the "Menu/Esc" button as
required to move up the menu levels and, if desired, out
of the menu system.
Click the "Edit Timezone" button to edit the recording
parameters for a specific period (see the image on the right).
From: Displays the preset period's start time
46