Table of Contents
Advertisement
Button: Click these buttons to activate their functions.
Slide bar: Click and drag the bar to the desired value.
* Note about the on-screen keyboard:
Click on a button to input that character.
The buttons on the right and bottom have the following functions:
2.2 USING THE FRONT-PANEL BUTTONS
2.2.1 How to select a Channel and enable its Audio
1. In a screen layout that shows more than one channel, the user can flick the control wheel's outer ring left and right to
scroll through the channel boxes. The selected channel box will be highlighted by a white frame. Scrolling sideways
when the last / first camera (1 or 16) is highlighted, will select all cameras. Scroll again to select only one channel.
2. To assign a channel's audio feed to the DVR's single Audio Out line, highlight the channel and click the Enter button.
A speaker icon will appear on the channel box, indicating that the channel's audio is assigned to the Audio Out line.
This icon will disappear if it (Audio On) is activated in another channel box, because only one channel's audio feed
can be assigned to the Audio Out line. Click Enter again to turn the channel's audio off (to "un-assign" it from the
Audio Out line).
2.2.2 Opening the OSD Root Menu
1. Press the "Menu" key to display the DVR's menu bar. Flick the control wheel's outer ring to scroll over each icon. The
title for each icon will be displayed at the top left of the menu bar.
2. Scroll to an icon and press the "Enter" key to perform that action or open that submenu. All actions are covered in
detail in Chapter 3.
3. Press "Menu" again to close the DVR's menu bar.
Space
Enter a space
Caps
Switch to capital letters
Delete the letter
Confirm the entry
Scroll to the right
Scroll to the left
14
Advertisement
Table of Contents
