2.2.3 Basic Principles of Front-Panel Button Navigation
The basic principle of navigating with the front-panel buttons is to use the control wheel's outer ring to scroll through the
menu items. If the outer ring cannot be used to scroll, it would indicate that the wheel's inner disk can and should be used to
scroll (as is the case with certain submenus). IN SOME CASES: Use the control wheel's outer ring to scroll horizontally, and
the inner disk to scroll vertically. Use the "Enter" key to confirm a selection or enter the next menu level. Press the "Menu"
key to open the Main Menu or to exit from the current menu level.
2.2.4 Navigating the Configuration Menu
Press "Menu", use the control wheel's outer ring to highlight the "Configuration" icon, and press "Enter" to open the
Configuration menu.
NOTE: If the DVR has been set up to require a password, you will need to log in first. Refer to "Section
!
來 源 來 源 來 源 來 源 。 。 。 。 錯 誤 錯 誤 錯 誤 錯 誤
找 不 到 參 照 來 源 。 。 。 。
找 不 到 參 照 來 源
找 不 到 參 照 來 源
找 不 到 參 照 來 源
main sections.
2
1. The Top Bar shows the shortcut icons of the ten submenus of the Configuration menu. The blue frame around the
Camera icon shows that the Camera submenu has been selected. Use the control wheel to highlight an icon and
press "Enter" to select it.
2. The Left Column shows the submenus for the selected submenu. Use the inner part of the control wheel to highlight
a menu item and press "Enter" to select it. The area to the right (the Main Body) will change every time a different
submenu title is scroll/selected, as this area is the configuration field of each menu item in the Left Column.
" for information on logging in. The menu (shown in the image below) is divided into 3
15
!
錯 誤 錯 誤 錯 誤 錯 誤
找 不 到 參 照
找 不 到 參 照
找 不 到 參 照
找 不 到 參 照
1
3