Alarm Action - EverFocus ELR-4 Instruction Manual

5.6.4 Alarm Action

Alarm: Select a number to change the schedule for that alarm. Each alarm can be set on a 24 hour time
block for Holiday (Hol), Other (Oth), Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed),
Thursday (Thu), Friday (Fri), or Saturday (Sat).
Time Bar: The time bar uses two different colors to distinguish each recoding mode.
Off: No recording during this time block.
On: Alarm action will be recorded during this time block.
To Set Schedule using Mouse
1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected block
will be highlighted in blue frame and the selected time bar will be highlighted by red frame.
There are 24 blocks on the time bar representing 24 hours respectively. Set a schedule start time
by clicking on a desired start time block on a time bar and clicking again to confirm it. At this time,
the selected block and all following blocks will turn gray, which means this gray timezone has been
set to the recording mode of gray (alarm action recording off).
2. Click again to confirm, then a new number (for the new section) will show on this block and current
and all following blocks will turn to gray. This means this new gray timezone has a new record
mode (alarm action recording off).
Change the section to different mode (with different color) by clicking on the first block of each
section. The color switches from gray -> orange, every time user clicks the first block of a section.
67