Information; System; Log - EverFocus PARAGON 264x1 User Manual

5.10 INFORMATION

Below is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information.

5.10.1 System

System
Version: Displays the firmware version number.
Model: Displays the DVR model number.
NTSC/PAL: Displays the current video format (i.e. the format
that was auto-detected on the Channel 1 input during boot-up).
Network
IP: Displays the DVR's current IP Address as set in the Network or Express Setup screen.
MAC: The unique address of the DVR's internal network card. This option cannot be changed.
DVR Name: Displays the DVR's DDNS name, if configured.
Network ID: The ID number for the PowerCon alarm network as set in the Alarm Server screen.
Status
Disk: Displays the status of the installed disk(s); normal disk operation is indicated by "OK".
Fans: Displays the status of the fans; normal fan operation is indicated by "OK".

5.10.2 Log

This screen is used to choose, display and/or export log
entries.
From
Date: Select starting date of log to be displayed.
Time: Select starting time of log to be displayed.
To
Date: Select end date of log to be displayed.
Time: Select end time of log to be displayed.
Log Type:
Configurations: to see log entries related to configuration changes.
Event: to see log entries related to events.
Record: to see log entries related to recording changes.
Operation: to see log entries related to operation changes.
60