Router Or Lan Connection - EverFocus PARAGON 264x1 User Manual

Note: If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the network
settings. However, if you want to access the DVR over the Internet (not just over a LAN), it is highly
recommended that you use a static IP address.
Exit from the DVR's Menu to save the settings.
To access the DVR from a computer, open Internet Explorer and in the address bar type:
http:// (the static IP address given by your internet service provider)
Note: When using this type of connection, only one device can be connected to the modem at a time. You will
need to use a computer at a different location to test the connection.

6.9 ROUTER OR LAN CONNECTION

Straight-Through Ethernet Cable Pin outs:
The Figure below shows the pin configurations for a straight-through cable (standard network cable).
69