Camera Setting - EverFocus ELR-4 Instruction Manual

Network Type:
Fixed IP: User can set a fixed IP for network connection.
DHCP: DHCP server in LAN will automatically assign IP for network connection.
PPPoE: This is a DSL connection application ONLY. Check with your ISP if they use PPPoE.
IP Address: This field shows the current IP Address for the DVR. A Fixed IP address must be set manually.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the DVR will be recognized within the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS server 1: This field shows the primary DNS server for your network. When DHCP is selected and an
internet connection is available, this value will be assigned automatically. This field must be assigned
correctly if you plan to use the DDNS feature (see 5.7.3 DDNS for more detail).
DNS server 2: This field shows the secondary DNS server for your network.
Note: The default addresses in the machine are for internal testing only. You must apply
your own addresses to comply with your network. Refer to Chapter 8 for more details.
Apply: Press "Apply" button to save and apply Express settings to DVR. The system will automatically
adjust recording frame rate according to settings. The following message will pop up, press "Yes" to change
Resolution, Recording frame rate and Quality depending on your express setting.

5.3 CAMERA SETTING

Figure 5-2 is a screen shot of the CAMERA SETTING MENU. This menu is used to configure individual
camera settings.
40