Installation Procedures; To Install A Remote Epo - Powerware 9330 Installation & Operation Manual

Installing a Remote Emergency
Power Off (EPO) Control

Installation Procedures

4.1

To install a Remote EPO:

4.2
NOTE: Before installing a Remote EPO, be sure you have prepared the UPS
according to the instructions in Chapter 2.
To install a Remote EPO control:
1.
Remove cover (see Figure 4---2) from Remote EPO switch enclosure bottom.
NOTE: If mounting to a hollow wall, secure the enclosure bottom to a wood or metal
stud within the wall. Do not use hollow wall anchors.
2.
Securely mount the Remote EPO switch enclosure bottom. Recommended
locations include operator's consoles or by exit doors. Refer to Appendix A,
Drawing 164201491---14, for enclosure dimensions and wiring knockouts.
Powerware 9330 (IBM 9910 20 kVA) Installation and Operation
164201491 REV. B 013004
Figure 4 ---1. Remote EPO Control
4
4--1