Arm Width Adjustment - Shoprider Valencia GK10 User Manual

Continued.....
Arm Adjustments
On each side of the seat towards the back there are two hand knobs. These are to adjust the width
of the armrests or to remove then for transport.
Turn the knobs anti-clockwise to loosen. Once the knobs are loose you will be able to adjust the
armrests in or out to the desired width. Re-tighten when a comfortable width has been achieved or
remove the armrests completely for transport.
To adjust the angle of the armrest, unscrew the main bolt until the desired the angle is achieved.
Lock the bolt in place with the locking nut.
To adjust the height of the armrest, undo the handknob until the armrest can be raised / lowered.
Once the required height is achieved refit the handknob, ensuring the pin locates fully in the hole
in the armrest tube.
If removing the armrests for transport, ensure that the knobs are re-tightened to avoid them
rattling loose and falling out.
Do not apply full body weight to the armrests for transferring. Pivot the seat or lift the arm up
out of the way to transfer to another seat.
8