Tiller Controls - Shoprider Valencia GK10 User Manual

Tiller Controls

Thumb Lever Controls
The thumb lever controls the reverse and forward motion of the scooter. Pressing the right lever
will drive the scooter forward, pushing the left lever will reverse the scooter. The amount of
pressure applied to the levers will determine the speed the scooter travels up to the maximum
speed selected. More pressure = more speed. Release the thumb lever and the scooter will
automatically come to a safe stop as the electromagnetic brake is applied.
Horn Button
This should only be used to warn others of your
The yellow button operates the scooters horn.
presence and not as a rebuke of any form.
Battery Level Indicator Gauge
This gauge gives you a guide to the amount of charge left in the scooters batteries. This will give
Always fully charge the batteries before
the truest reading when the scooter is in motion.
driving your scooter and never let the batteries become completely drained, as this may cause
permanent damage to the batteries.
On/Off Key Switch
Insert the key supplied with the scooter and turn clockwise. The battery gauge needle will move.
There may be a slight delay before the thumb levers operate as the controller checks the scooters
Never leave the key in the switch unattended to prevent unauthorised use. Do not
circuits.
switch the power off to stop the scooter unless it is an emergency. The scooter will stop very
abruptly if stopped in this way.
9