Related Manuals for Shoprider QT3
Summary of Contents for Shoprider QT3
-
Page 1: Owners Manual
OWNERS MANUAL MODELS QT3 & QT4 QT8 & GK7... - Page 2 Mounting Make sure your Q.T. Scooter is on level ground –Battery charge meter will be in the green. Seat yourself in the Scooter. Turn the speed dial to slow. (Turn the dial to the left). Turn the on/off key to the ON position –Battery charge meter will be in the green. Dismounting Ensure that your Q.T.
-
Page 3: Basic Driving
Basic Driving Make sure you have completed the details described under “mounting”. For the standard unit push on the accelerator lever with your RIGHT thumb to start moving forward. To STOP gently release the accelerator lever. Practise these two basic functions until you are proficient in their use. Steering the Q.T. -
Page 4: Transporting Your Scooter
Doors Always ensure your speed is set at the SLOWEST setting. Think in terms of using the power of the Q.T. Scooter to do the work for you. For doors that open outward, hold the door knob with your right hand and reverse the Q.T. - Page 6 CHARGING The battery pack can be charged as an independent unit. It does not have to be connected to the scooter (See Diagram below) The battery charge level indicator will be in the RED section when the battery is very low.