Shoprider Valencia GK10 User Manual page 19

Continued.....
In the image opposite you will see three white
lines. To ensure the battery pack is properly
assembled, the surfaces must be level at these
points. Failure to do so may result in no power
to the scooter or a break in the charge circuit
which would not allow the pack to charge.
Note: If charging 'off board' – the packs must be correctly connected as described above.
As indicated in the image, the circuit breaker
is located on the top of the right hand pack.
Should the scooter fail to operate and show
no power, check to see if the circuit breaker
button has not 'popped' up. To reset the
circuit breaker simply press the button.
The charge socket is located at the front of
the right hand pack. The scooter maybe
charged with the packs connected to the
scooter or off board. Please make note of the
comment above regarding the re-assembly
of the pack if charging off board.
19