Seat Removal; Seat Height; Arm Width Adjustment - Shoprider Mikra TE-7A User Manual

Continued.....

Seat Removal

To remove the seat, fold down the back of the seat and simply lift the seat away from
the chassis while lifting the seat swivel lever.
Do not hang baggage or other objects on the back of the seat as this may affect
stability.
Battery Box Removal
The battery boxes are simply lifted out of position. The LEFT battery box MUST be
removed before the right hand side. The procedure is reversed for refitting the battery
packs. (Left and right sides are taken as if sitting on the scooter facing forward).
Seat Height Adjustment
Remove the seat as previously
described and remove the battery
box as described above. Undo the
stem-locking bolt and adjust the stem
to the desired height. Re-fit the bolt
and tighten. Re-fit the seat as above.
The higher the seat is adjusted; stability may be affected due to the higher centre of
gravity.
Arm Adjustments
On each side of the seat
towards the back there are
two hand knobs, these are to
adjust the width of the
armrests or to remove then for
transport.
Turn the hand knobs anti-
clockwise to loosen. Once the
knobs are loose you will be
able to adjust the armrests in
or out to the desired width. Re-
tighten when a comfortable
width has been achieved or
remove the armrests
completely for transport.
If removing the armrests for transport, ensure that the hand knobs are re-tightened to
avoid them rattling loose and falling out.
Do not apply full body weight to the armrests for transferring. Lift the arm up out of the
way to transfer to another seat.
7