Seat Swivel / Removal; Seat Height - Shoprider Valencia GK10 User Manual

Continued.....

Seat Swivel / Removal

To swivel the seat, simply lift
the release handle and swivel
the seat to transfer to or from
the scooter. To remove the
seat, fold down the back of the
seat. Lift the swivel release
handle up to the seat and
gently lift the seat from the
Always ensure that
chassis.
the seat is securely locked in
the forward facing direction
when driving the scooter. Do
not hang baggage or other
objects on the back of the
seat as this may affect
stability.
Seat Height Adjustment
Remove the seat as previously
described and remove the
battery pack Undo
securing screw with an allen
key and use two
spanners and undo the locking
bolt and nut. Adjust the seat
post up or down to the desired
height and relocate
locking bolt through the hole
and replace the washer and
nut and re-tighten. Replace the
battery and the seat.
higher the seat is adjusted;
stability may be affected due
to the higher centre of
gravity.
IMPORTANT: Your seat height is set in the lowest position for shipping purposes. In this
position the seat must be removed to allow the battery pack to be removed.
the
13mm
the
The
7