Adjustment - Shoprider ROCKY 8 Owner's Manual

ADJUSTMENTS
Tiller Angle Adjustment (Fig. 1)
The tiller of your scooter is uniquely designed to
Tiller Angle
allow you to position it to a comfortable driving position.

Adjustment

Your scooter's tiller is very versatile, and can be
adjusted to different positions. To decide which position
best fits your needs, carefully push the black lever that
is located on the right side of tiller, and gently lower or
USB Port
raise the tiller. Once you are satisfied with the position
of the tiller, simply release the black lever and the
Fig. 1
tiller will automatically lock for your safety.
USB Port (Fig. 1)
The USB Port (Output DC 5V, 2.1A Max.) is embedded onto the tiller cover for the
convenience of charging 1 set of your USB device, such as mobile phone.
Warning: For your own safety, please be careful if the USB port is used for charging
your device while in driving. Do not use your mobile phone whist driving
Armrest Angle Adjustment (Fig. 2)
Flip up the armrests to allow access to the
adjustable bolt and lock nut, unscrew the
Adjustable
lock-nut and screw the bolt in or out to
Bolt
increase or decrease the angle. Re-tighten
the lock-nut. Your scooter is dispatched from the
Lock-Nut
factory with the armrests set parallel to the floor.
Fig. 2
Armrest Height Adjustment (Fig. 3)
The vertical square tube connected with
the armrest can be reset to the desired
position by re-tightening the hand knob
for armrest height adjustment.
Armrest Adjustable
Hand Knob
Fig. 3
8