Shoprider Valencia GK10 User Manual page 18

Split Battery Pack Instructions
Your new Shoprider Valencia mobility scooter is fitted with a cable free split battery pack design
which enables the batteries to be carried individually.
The images and instructions below show the seat removed from the scooter. Should the seat be set
in its lowest position, it must be removed prior to removing the battery packs. (For ease of access
we recommend that the seat be removed prior to removing the batteries).
As shown in the image, the left battery box is
shown as '1' and the right as '2'.
At this stage the battery boxes maybe removed
as one complete unit or individually.
To remove as a complete unit BOTH handles
must be used to lift the pack away from the
scooter.
To remove individually, hold both handles and
lift pack '1'. You will feel it unclip from pack '2' –
it may now be lifted away from the scooter.
The image opposite shows the left pack
removed. There are no cables involved which
may require unplugging.
Pack '2' can now be simply lifted away from the
scooter.
Re-fitting is a reversal of this procedure.
When refitting pack '1' it is important that it
'clips' securely into pack '2'.
18