Connecting To The Remote Control Unit (Aj-Rc10G); Switch Functionality In Remote Control Mode; Recording And Playback Operations In Remote Control Mode; Remote Control Unit Connected To The Camera - Panasonic AJ-PX5000G Operating Instructions Manual

Chapter 8 Connecting to External Devices — Connecting to the remote control unit (AJ-RC10G)

Connecting to the remote control unit (AJ-RC10G)

f Connect the remote control unit AJ-RC10G (optional) to remote-control some functions.
f When you connect AJ-RC10G and set the <POWER> switches of the camera and AJ-RC10G to <ON>, the camera automatically enters the remote
control mode.
f Remove AJ-RC10G, or set the <POWER> switch on AJ-RC10G to <OFF> to release remote control mode.

Switch functionality in remote control mode

The following switches and buttons on the camera do not function in remote control mode.
f <SHUTTER> switch
f <MENU> button
f Jog dial button
f <GAIN> selector switch
f <OUTPUT>/<AUTO KNEE> selector switch
f <WHITE BAL> switch
f <USER MAIN> button
f <USER 1> button
f <USER 2> button

Recording and playback operations in remote control mode

Recording/playback operations can be performed both on the camera and AJ-RC10G when the remote control unit is connected.

Remote control unit connected to the camera

When AJ-RC10G is connected to the camera, the operations of the following functions differ from the descriptions in the Operating Instructions supplied
with AJ-RC10G.
r <A.KNEE ON> button
By selecting [DRS] from the main menu → [CAMERA] → [SW MODE] → [AUTO KNEE SW] on the camera, you can switch [DRS] between [ON]/[OFF]
with this button. The button lights up when [DRS] is [ON], and the light goes off when it is [OFF].
r <CHARA ON> button
Selects whether the characters are superimposed over the video signals output to the <VIDEO OUT>, <SDI OUT2>, and <HDMI OUT> terminals of the
camera.
When AJ-RC10G is connected, the <MON OUT CHARACTER> switch of the camera does not function.
r Scene files
Scene files created on other models cannot be loaded. If you try to load such a file, [NG] is displayed on the LCD of AJ-RC10G.
r Menu
[GAMMA]
[WHITE]
[KNEE]
[C-COR]
<REMOTE> terminal
f The variable range of [GAMMA-MODE-SEL] is as follows.
[HD], [SD], [F-LIKE1], [F-LIKE2], [F-LIKE3], [FILM REC], [VIDEO REC]
f [DYMC-LVL] and [BSR-LVL] are added in the fourth level.
The variable ranges are as follows:
[DYMC-LVL]: [200%] to [600%]
[BSR-LVL]: [00%] to [30%]
Note that you can change the values only when [FILM-REC] is selected for [GAMMA-MODE-SEL].
f [V-KNSLP] and [V-KNPNT] are added in the fifth level.
The variable ranges are as follows:
[V-KNSLP]: [150%] to [500%]
[V-KNPNT]: [30%] to [107%]
Note that you can change the values only when [VIDEO REC] is selected for [GAMMA-MODE-SEL].
f The variable range of [COLR-TEMP-PRE], [TEMP-A], and [TEMP-B] is [< 2300K] to [> 15000K].
f [CHROMA LEVEL] is added in the fifth level. The variable range is [OFF]/[−99%] to [40%].
f [HI-COLOR LVL] is added in the sixth level. The variable range is [1] to [32].
f [DRS MODE] is added in the seventh level. The variable range is [MODE1]/[MODE2].
f [DRS EFFECT DEPTH] is added in the eighth level. The variable range is [1]/[2]/[3].
f The following items in the camera's main menu → [PAINT] → [COLOR CORRECTION] cannot be set from AJ-RC10G.
[R-R-Mg (SAT)], [R-R-Mg (PHASE)], [Yl-Yl-R (SAT)], [Yl-Yl-R (PHASE)], [Yl-R-R (SAT)], [Yl-R-R (PHASE)]
AJ-RC10G
– 213 –