Table of Contents
Advertisement
Chapter 9 Connecting to External Devices — Connecting to the remote control unit (AJ-RC10G)
Connecting to the remote control unit (AJ-RC10G)
f Connect the remote control unit AJ-RC10G (optional) to remote-control some functions.
f When you connect AJ-RC10G and set the <POWER> switches of the camera and AJ-RC10G to <ON>, the camera automatically enters the remote
control mode.
NOTE
@
t When connecting and disconnecting the dedicated cable, ensure that you turn the <POWER> switches of the camera and AJ-RC10G to
<OFF>.
t Do not use any cable other than the AJ-RC10G dedicated cable or dedicated optional cable. Doing so may result in a malfunction.
t The <USER> buttons (<USER MAIN>/<USER1>/<USER2>) and the <MENU> button do not activate during AJ-RC10G connection.
t Refer to the operating guide of "AJ-RC10G for AG-HPX600/610 series (AG-HPX600P/HPX610P/HPX600EJ/HPX610EJ/HPX600EN)" at the
following website:
http://pro-av.panasonic.net/en/manual/index.html
t For details on the current from the <REMOTE> terminal, refer to "Details of the connector signals" (page 173).
<REMOTE> terminal
– 151 –
AJ-RC10G
Advertisement
Table of Contents
