Menu List; [Paint]; Rb Gain Control; Rgb Black Control - Panasonic AJ-PX5000G Operating Instructions Manual

Menu list

[PAINT]

These are items for performing fine image adjustments while monitoring the output waveform of the camera using the waveform monitor. You will need
support from video engineers to use configure these settings.
These menu item settings are enabled when using the camera as a standalone device.
These menu items can be set from an external remote controller.
These menu items cannot be set when the thumbnail screen is displayed.

[RB GAIN CONTROL]

Item
[R GAIN AWB PRE]
[B GAIN AWB PRE]
[R GAIN AWB A]
[B GAIN AWB A]
[R GAIN AWB B]
[B GAIN AWB B]
[AWB A GAIN OFFSET]
[AWB B GAIN OFFSET]
@ NOTE
t Settings made through the menu are disabled when the remote control unit and extension control unit are connected. (Setting values are displayed.)

[RGB BLACK CONTROL]

Item
[MASTER PED]
[R PEDESTAL]
[G PEDESTAL]
[B PEDESTAL]
[PEDESTAL OFFSET]
[R FLARE]
[G FLARE]
Chapter 7 Menu Operations — Menu list
Sets the Rch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain when the <WHITE BAL> switch is on <A>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <A>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain when the <WHITE BAL> switch is on <B>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <B>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain and Bch gain when performing automatic white balance after the <WHITE BAL> switch
is on <A>.
[ON]: Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A].
[OFF]: Sets the value of Rch gain and Bch gain to [0].
f Factory setting: [OFF]
Sets the Rch gain and Bch gain when performing automatic white balance after the <WHITE BAL> switch
is on <B>.
[ON]: Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B].
[OFF]: Sets the value of Rch gain and Bch gain to [0].
f Factory setting: [OFF]
Sets the master pedestal level.
[−200]...[200]
f Factory setting: [16]
Sets the Rch pedestal level.
[−100]...[100]
f Factory setting: [0]
Sets the Gch pedestal level.
[−100]...[100]
f Factory setting: [0]
Sets the Bch pedestal level.
[−100]...[100]
f Factory setting: [0]
Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON]: Keeps each of the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL].
[OFF]: Sets the pedestal level of Rch, Gch, and Bch to [0].
f Factory setting: [OFF]
Adjusts the Rch flare level.
The adjusted value of this item is added to the flare adjusted value in the main menu → [MAINTENANCE]
→ [LENS FILE ADJ.].
[−100]...[100]
f Factory setting: [0]
Adjusts the Gch flare level.
The adjusted value of this item is added to the flare adjusted value in the main menu → [MAINTENANCE]
→ [LENS FILE ADJ.].
[−100]...[100]
f Factory setting: [0]
– 149 –
Description of settings
Description of settings