Panasonic AJ-PX5000G Operating Instructions Manual page 78

r When multiple cameras are connected and one is used as a reference camera
When building a system using multiple cameras, set the inputs and outputs to the same on all cameras. If different settings are set, shooting timing will
no longer match.
<TC OUT> terminal
Reference video signal
Reference camera
r When the camera and external device are locked to the external time code generator, and the TC OUT output signal of the camera
is used for simultaneous recording
Reference video signal
TC OUT terminal
TCG
External time code generator
r When the camera and external devices are locked to the external time code generator and two or more cameras are connected in
a cascade configuration
Reference video signal
TC OUT terminal
TCG
External time
code generator
DAT
Device capable of recording
without delay
Chapter 4 Adjustments and Settings for Recording — Setting the time data
<TC OUT> terminal
<TC IN> terminal
<GENLOCK IN> or <SDI
IN> terminal
<TC IN> terminal
TC IN terminal
DAT
Device capable of recording
without delay
<HDMI OUT> terminal
<SDI OUT1> terminal
<SDI OUT2> terminal
<VIDEO OUT> terminal
<GENLOCK IN> or
<SDI IN> terminal
TC IN terminal
<TC OUT> terminal
<TC IN> terminal
1st camera
[TC OUTPUT REF] setting:
[TC IN]
Reference video signal
<GENLOCK IN> or <SDI
<GENLOCK IN> or <SDI IN> terminal
<TC OUT> terminal
[TC OUTPUT REF] setting:
[VIDEO OUT]
<GENLOCK IN> or
<SDI IN> terminal
<TC OUT> terminal
<TC IN> terminal
2nd camera onwards
[TC OUTPUT REF] setting:
[TC IN]
– 78 –
<TC IN> terminal
IN> terminal
TC IN terminal
Recording device
HDMI IN terminal
SDI IN terminal
VIDEO IN terminal
<GENLOCK IN> or
<SDI IN> terminal
<TC OUT> terminal
<TC IN> terminal
To next camera
REF IN terminal