Connection Of The Remote Control Unit (Aj-Rc10G) - Panasonic AJ-HPX3700G Operating Instructions Manual

!"#$%&'())*#+,-.+/012345677899.N'9:;<99=>>?@A>BACDEFGDEHIJKL?M
Connection of the remote control unit
It is possible to control some of the functions remotely by
connecting the remote control unit AJ-RC10G (optional).
When AJ-RC10G is connected to the REMOTE connector
on the unit and the power switches of both of the unit and
AJ-RC10G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned off.
Switch functions in the remote control mode
In the remote control mode, the following switches and
buttons on the unit are disabled.
" SHUTTER switch
" MENU button
" Jog dial button
" GAIN switch
" OUTPUT/AUTO KNEE switch
" WHITE BAL switch
" USER MAIN button
" USER 1 button
" USER 2 button
(AJ-RC10G)
Recording and playback Operations in the
remote control mode
When the remote control is connected, recording and
playback can be controlled through both the unit and the AJ-
RC10G.
#Notes
" The state that was adjusted by connecting AJ-RC10G is
stored in the unit. Not to store the adjusted state in the
unit, open the FUNCTION MENU of AJ-RC10G to set the
RC DATA SAVE item to "OFF".
" When the dedicated cable is connected or removed,
ensure that the POWER switches on both the main unit
and AJ-RC10G are turned off.
" Use Ver 1.11-00-000 or a later version of AJ-RC10G.
See the P2 support page on the following website for
information about upgrades to AJ-RC10G.
https://eww.pavc.panasonic.co.jp/pro-av/
a. REMOTE connector
b. Dedicated cable
Notes for the remote control unit
When this unit and AJ-RC10G are connected, the following
functions differ from those described in the operating
instructions that accompany AJ-RC10G.
A. KNEE ON button
When "DRS" has been selected in the AUTO KNEE SW
menu option of this unit, this button can be used to
switch DRS on/off. This button is lit when DRS is on and
not lit when DRS is off.
The menu option AUTO KNEE SW can be found in the
<SW MODE> screen on the CAM OPERATION page.
Preparation: Connection of the remote control unit (AJ-RC10G)
b
a
AJ-RC10G
123