Power Supply And Accessory Mounting Section - Panasonic AJ-PX5000G Operating Instructions Manual

Chapter 2 Description of Parts — Power supply and accessory mounting section
f Connect the remote operation panel AK-HRP200G (optional) to remote-control some functions. For details, refer to "Connecting to Remote
operation panel (AK-HRP200G)" (page 216).
16 Cable holders
Used for clamping the light and microphone cables in place.
17 Accessory mounting holes
Attach accessories. Do not use for purposes other than attaching accessories.
f Mounting hole size
- 1/4-20 UNC (screw length 10 mm or shorter)
- 3/8-16 UNC (screw length 10 mm or shorter)
18 Light shoe
Attach the video light.
f Mounting hole size
1/4-20 UNC (screw length 6 mm or shorter)
19 Viewfinder front/back position clamp lever
To adjust the front/back position of the viewfinder, loosen this lever, and slide the viewfinder to the left or right to adjust it to an easy-to-view position.
After adjustment, turn in the <LOCK> direction and firmly clamp.
20 Light output terminal
Connect the Ultralight 2 of Anton/Bauer (optional) or an equivalent video light of 50 W or under.
The battery charge level drops sharply when the light is illuminated. When using the light, using a battery of 90 Wh or more is recommended.
21 Microphone holder mounting screws
Screws for mounting the microphone holder AJ-MH800G (optional) or VF interface box AG-YA500G (optional).
22 <LENS> terminal (page 111)
Connect the lens connection cable. For details of the lens used, refer to the Operating Instructions for the lens.
– 16 –