Skin Tone Dtl - Panasonic AJ-PX5000G Operating Instructions Manual

[SKIN TONE DTL]

Item
[[S] SKIN TONE DTL]
[[S] ZEBRA VF]
[[S] ZEBRA SDI OUT1]
[[S] ZEBRA MONI]
[DETECT TABLE]
[SKIN TONE GET]
[SKIN DTL EFFECT]
[I CENTER]
[I WIDTH]
[Q WIDTH]
[Q PHASE]
@ NOTE
t When saving or reading setup files from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
Chapter 7 Menu Operations — Menu list
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying skin
tone detail. Select one, two, or three skin tones from the [A], [B], and [C] tables.
[A], [B], [C], [AB], [AC], [BC], [ABC], [OFF]
f Factory setting: [OFF]
[SKIN TONE DTL] works independently from the details set in each item of [LOW SETTING], [MID
SETTING], [HIGH SETTING], [ADDITIONAL DTL], and [[S] CAMERA SETTING].
Set to display a zebra pattern in the skin tone area displayed in the viewfinder screen.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL] is open.
The zebra pattern displays the area selected in [SKIN TONE DTL].
[ON], [OFF]
f Factory setting: [OFF]
Set whether to display skin tone zebra in the SDI OUT1 signal.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL] is open. The zebra
pattern displays the area selected in [SKIN TONE DTL].
[ON], [OFF]
f Factory setting: [OFF]
Set whether to display skin tone zebra in the monitor output (SDI OUT2, HDMI OUT, VIDEO OUT) signal.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL] is open. The zebra
pattern displays the area selected in [SKIN TONE DTL].
[ON], [OFF]
f Factory setting: [OFF]
Selects the skin tone table of the subject that displays skin tone detail.
[A], [B], [C]
f Factory setting: [A]
Obtains the color information of [A], [B], or [C] selected in [DETECT TABLE] from near the center marker.
If executed, data from [I CENTER] to [Q PHASE] are automatically obtained.
The obtained data becomes the table data of [A], [B], or [C] selected in [DETECT TABLE].
Multiple color information for [A], [B], and [C] cannot be obtained simultaneously.
Sets the effective level of the skin tone detail.
[0]...[31]
f Factory setting: [16]
Sets the center position of the upper I axis (setting the area that displays skin tone).
[0]...[255]
f Factory setting: [35]
Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER].
[0]...[255]
f Factory setting: [55]
Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER].
[0]...[90]
f Factory setting: [10]
Sets the phase of the area that displays the skin tone regarding to the Q-axis.
[−180]...[179]
f Factory setting: [0]
R-Y
[Q WIDTH]
[I WIDTH]
+ direction
[I CENTER]
[Q PHASE]
- direction
Description of settings
B-Y
Skin tone area
– 155 –