Supply Gas; Pack Contents - Valor 530 Direct Vent Installation Manual

All appliances are supplied for installation with natural gas. The supply pressure must be between the limits shown in section
3.2 of this manual.
The supply connection is
The opening for the gas supply line is at the rear left corner of the appliance.
#530EAN Engine unit (Either log or coal version
supplied)
1 Appliance engine unit fitted with window
2 Restrictor plates type #1 for log versions
2 Restrictor plates type #2 for log versions
2 Restrictor plates type #3 for log versions
2 Restrictor plates type #4 for coal versions
2 Restrictor plates type #5 for coal versions
2 Restrictor plates type #6 for coal versions
1 Port cover
1 Gas inlet pipe connection adapter
1 Firebox ceramic rear wall
2 Firebox ceramic side walls
5 Ceramic fuel effects (logs or coals)
1 Switch unit
2 Wire clips
4 1.5V AA batteries
4 Wood screws
4 Wall plugs
2 Thread cutting screws
#531CSB President free standing case (Alternative)
Top pack
1 Top casting
1 Top infill plate
Sides pack
1 Front casting unit
2 Side casting units
1 Top air deflector
1 Switch mounting bracket
2 Wall spacer brackets
2 Self cutting screws
4 Machine screws
4 Washers
Take care when removing the contents from the packaging to prevent damage. Check that all the contents are in the packs and
are undamaged.

6. SUPPLY GAS

3
/ ''NPT.
8

7. PACK CONTENTS

Manufactured by Miles Industries Ltd., British Columbia, Canada
#536CFB President
1 Front unit
1 Top air deflector
2 Stand-off spacers (Supplied flat)
2 Top insulation layers
1 Outer surround unit
1 Front plinth
1 Rear base support channel
1 Pack of thread cutting screws
2 Hooks (For hanging the front) – Impression only
#553RCK Remote control unit (Additional option)
1 Receiver unit
1 Remote control hand unit
4 1.5V AA Batteries
1 9V Battery
#557WSK Wall switch unit (Additional option)
1 Wall switch unit
1 Battery holder
1 20ft (6.1m) length of connection wires
2 Screws for wall switch
#551DVK Standard horizontal through-the-wall vent
kit (Alternative to Dura-vent unit)
1 Vent pipe & terminal unit
2 Wall plates
2 Wall shields (Supplied flat)
12 Thread cutting screws
1 Styrofoam cutting support do-nut
8 Wood screws
8 Wall plugs
#555CFK Circulating fan kit (Additional option)
Details are with the kit
#554LPK LPG conversion kit
Details are with the kit
21