Venting Configurations - Valor 530 Direct Vent Installation Manual

5.2. Venting configurations

5.2.1. Flat on wall (Fig. 22)
Requires standard vent kit #551DVK only.
The horizontal vent run can not be extended by the use of any
vent accessory pipes.
5.2.2. Flat on wall with snorkel termination (Fig. 23)
For use on horizontal vent installations where the outside ground
level is too close to the standard terminal. Adapter #817VAK, a
Dura-vent pipe length and snorkel termination #981 or #982 will
be required (See vent options section of this manual).
5.2.3.
Figure 22
Figure 23
Manufactured by Miles Industries Ltd., British Columbia, Canada
14