Options; Appliance Styles; Additional Optional Features; Lp Gas - Valor 530 Direct Vent Installation Manual

Heater engine unit #530EAN is used with all installations.

2.1. Appliance styles

President FS Free standing cast iron stove.
(See figure 1),
Black textured - Kit #531CSB.
Black enameled – Kit #532ESB.
Green enameled – Kit #533ESG.
President ZC For zero clearance inset in framed
recess.
Cast iron front. (See figure 2)
Black textured – Kit #536CFB.
Black enameled – Kit #537EFB.
Green enameled – Kit #538EFG.
One of the above kits must be used with each
installation.

2.2. Additional optional features

Remote control unit
Circulating fan
Wall switch

2.3. LP Gas

LPG Conversion kit
2.4.
Hand operated control for
flame & heat adjustment. It
may be fitted before the
fireplace is installed
retrofitted at a later date -
Kit #553RCK.
Having variable speed and
temperature control,
designed to boost the natural
convection process through the
appliance. It may be fitted
before the fireplace is installed
or retrofitted at a later date –
Kit #555CFK.
Optional kit that can replace
the flame and heat adjustment
switch fitted as standard to the
appliance.
Kit #557WSK
Burner & injector kit for
conversion from natural gas to
propane – Kit #554LPK.
Manufactured by Miles Industries Ltd., British Columbia, Canada

2. OPTIONS

Venting options

2.4.1. Direct vent installations
One or more of the accessories listed below must be used
for each installation. See the "Location" section of this
manual.
Kit#
551DVK
558FLK
817VAK
984
942
945B
990B
908B
907B
906B
904B
903B
902B
or
911B
981
it is
982
991
940
941
963
943
943S
953
988
923GCL
923GK
984
2280
835TG
2.4.2. B-vent installations – For President FS
only
Kit #552BVK converts this appliance from a direct vent
fireplace heater to a gravity vent fireplace heater for use
with a 4" "B" type vent. A full installation and operating
manual is supplied with the kit.
3
Valor terminal kit for non-combustible
wall thickness up to 26" (66cm)
(Combustible maximum 14" (36cm))
Through the wall Dura-vent pipe
insulation kit
Adapter for Dura-vent pipes
Dura-vent DV GS horizontal square
terminal cap
Dura-vent DV GS wall thimble kit
45° Dura-vent DV GS elbow
90° Dura-vent DV GS elbow
6" Dura-vent DV GS pipe length
9" Dura-vent DV GS pipe length
12" Dura-vent DV GS pipe length
24" Dura-vent DV GS pipe length
36" Dura-vent DV GS pipe length
48" Dura-vent DV GS pipe length
5
Adjustable 11"-14 / " Dura-vent DV GS
8
pipe length
Dura-vent DV GS snorkel termination
unit – 36" rise
Dura-vent DV GS snorkel termination
unit – 14" rise
Dura-vent DV GS high wind vertical
termination cap
Dura-vent DV GS round ceiling support
Dura-vent DV GS cathedral ceiling
support box
Dura-vent DV GS ceiling firestop
Dura-vent DV GS adjustable roof
flashing. Roof pitch 0/12 – 6/12
Dura-vent DV GS steep roof flashing.
Roof pitch 7/12 – 12/12
Dura-vent DV GS storm collar
Dura-vent DV GS wall strap
Dura-vent DV GS co-axial to co-linear
appliance connector
Dura-vent DV GS co-linear termination
kit
Dura-vent DV GS square terminal cap
Dura-vent DV GS co-linear flex chimney
liner 35ft. length.
Terminal Guard