Table of Contents
Advertisement
2.2
INSTALLING THE COMBUSTION CHAMBER
Establish which type of flue you are intending to install the fire in to :-
225 x 225mm (9 inch x 9 inch) lined brick built chimneys
125mm (5 inch) diameter lined brick or stone flue
A spillage test must always be carried out to check satisfactory
clearance of flue products, regardless of the type of flue the
appliance is being fitted to.
In all installations, the fire must be secured to the opening via the 4 off
screws and rawlplugs provided, through the fixing flange holes positions as
shown below in Fig. 2
Fig. 2
713mm
460mm
40mm
55mm
9
Advertisement
Table of Contents
