Fitting The Fuel-Bed Gravel - Flavel Pure FPRG**RN2 Installation And Maintenance Instructions Manual

Decorative fuel effect gas fire

Hide thumbs Also See for Pure FPRG**RN2:

Table of Contents

2.10

FITTING THE CERAMIC FUEL-BED GRAVEL

Fit the gravel pieces randomly onto the grooved base of the product as

shown below in Fig. 15.

Fig. 15

The ceramic fibre back & imitation gravel used in this product is

manufactured from R.C.F (Refractory Ceramic Fibre). To ensure that the

release of fibres from this item is kept to a minimum, during installation and

servicing we recommend that you use a HEPA filtered vacuum to remove

any dust accumulated in and around the appliance before and after working

on the appliance. When replacing these articles we recommend that the

replaced items are not broken up, but are sealed within heavy duty

polythene bags, clearly labelled as "RCF waste". RCF waste is classed as a

"stable", non reactive hazardous waste and may be disposed of at a landfill

licensed to accept such waste Protective clothing is not required when

handling these articles, but we recommend you follow the normal hygiene

rules of not smoking, eating or drinking in the work area, and always wash

your hands before eating or drinking.

IMPORTANT NOTE - FLAVEL PURE "BLACK"

BEFORE PROCEEDING TO LIGHT THE APPLIANCE, ENSURE THAT THE

PROTECTIVE FILM COVERING THE INNER REAR PANEL HAS BEEN

REMOVED. FAILURE TO REMOVE THIS PROTECTIVE FILM WILL RESULT

IN DAMAGE TO THE REFLECTIVE INNER PANEL.

GUARANTEE CLAIMS WILL NOT BE ACCEPTED FOR DAMAGE TO THE

REFLECTIVE INNER PANEL OF THE FIREBOX IF THE PROTECTIVE FILM

IS NOT REMOVED PRIOR TO INITIALLY LIGHTING THE FIRE.

Table of Contents